♥ This product can effectively remove within 10 minutes normal automobile radiator and engine cooling system of the scale, rust, mud and all kinds of dirt, but also for long-term without serious fouling cleaning and rusty water tanks can also be cleaned thoroughly.
♥ Without acid, alkali, high efficiency, fast, no damage to the parts and rubber and non-blocking waterways and so on. After the tank through the cleaning of this product, cooling water tank can improve efficiency and engine power, energy saving prolong engine life.
1.Dual action formula especially designed to remover grease and scum plus loose rust and scale.
2.Keep cooling system clean especially useful when changing antifreeze of engine coolant.
1. Allow engine and cooling system to cool. Do not add liquid to a hot radiator.
2. Drain cooling system, close drains, pour entire contents or can into radiator. Refill with water.
3. Start engine and run for 10 minutes. Stop engine and drain system.
4. Flush system until water runs clear. Close drain. Refill with manufacturer's recommended antifreeze/ water mixture. Replace radiator.
5. If equipped with coolant reservoir, rinse and refill with coolant mix to the indicated level.
Quick cleaning agent tank; steps are as follows:
1. engine shut down after 5 minutes idle, let go of the cooling fluid, the goods will be added after the addition of water tank full of water;
2. Start the engine to normal operating temperature, and then idle for 10-20 minutes, not long-term scale heavy or tank cleaning, take extra time to extend the cleaning;
3. off the engine, drain the tank of water, and add water, run for 5 minutes let go, cleaning is completed;
4. car (tank capacity 10 liters or less) with a can, cart (above water tank capacity 10 students) with two cans; necessary tools and products: cloth , quick cleaning agent tank; construction time is about 40 minutes